Application examples
– as insulation
– as support material
– to support carpentry in overflow

The high density of 150 kg/m³ not only provides very good support for the window/frame, it is also strong enough to easily transfer the loads from the window/frame to the structure underneath. The strips cut to size can be glued prior to masonry using the hybrid polymer adhesive ISO-TOP FLEXKLEBER WF and then screwed down.
The mechanical fastening of the window/frame is done with the appropriate fasteners, both to the ISO-TOP WINFRAMER TYPE 3 and to the structure.

Thicknesses: 20 – 30 – 40 – 50 – 60 – 70 – 80 – 100 mm

Dimensions: 800 x 1.200 mm
Also available in load-bearing profiles (x 1.200 mm)
80 x 80 mm / 140 x 80 mm / 160 x 80 mm / 180 x 80 mm

Advantages
– load capacity > 200 kg/metre
– lightweight = more workable
– important load-bearing capacity with adhesive sealant ISO-TOP FLEXKLEBER WF (*)
– sand-lime brick: 407.2 N/cm
– concrete: 353.5 N/cm
– Optimisation of the ?-value thanks to highly thermally insulating plates (?=0.040 W/(m-K))
– good resistance to compression
– easy to cut using a filament or wood saw
– Ideal for use with the “3-in-1” Iso-Bloco One® system or with the airtight or water-repellent films of the EASY FOIL-System.
– Versatile finishes possible with sealants against air, water, rain, …
– excellent for energy renovation of buildings

Het bericht ISO-TOP WINFRAMER TYPE 3-PL verscheen eerst op Castelein Sealants.

Application examples
– to support carpentry in overflow
– as insulation
– as supporting material (support)

The system offers considerable load capacity and load transfer. The high density of 150 kg/m³ not only provides very good support for the window/frame, the system is also strong enough to transfer the loads from the window/frame to the supporting structure without any problems. The system profiles are fixed directly to the structure using the hybrid polymer adhesive ISO-TOP FLEXKLEBER WF and then screwed on. The mechanical fastening of the window/frame is performed using the appropriate fasteners, both to the Iso-Top Winframer Type 3 and to the structure.

Dimensions of the load-bearing profiles (anthracite grey) :
80 x 80 mm / 140 x 80 mm / 160 x 80 mm / 180 x 80 mm
(x 1,200 mm)

Dimensions of the insulating beams (beige) :
30 x 80 mm / 50 x 80 mm (x 1,200 mm)

Advantages
– load capacity > 200 kg/metre
– lightweight = more workable
– important load-bearing capacity with adhesive sealant ISO-TOP FLEXKLEBER WF (*)
– sand-lime brick: 407.2 N/cm
– concrete: 353,5 N/cm
– Optimisation of the ?-value thanks to highly thermally insulating plates (?=0.040 W/(m-K))
– good resistance to compression
– complies with EnEV requirements and recommendations of the RAL “Installation Guide
– certified passive house component
– Ideal for use with the “3-in-1” Iso-Bloco One® system as well as with the airtight or water-repellent films of the EASY FOIL-System.
– simple length adjustment using a standard mitre saw; easy milling, drilling, gluing

Het bericht ISO-TOP WINFRAMER TYPE 3 SYSTEM verscheen eerst op Castelein Sealants.

Application examples
– to support carpentry in overflow
– as insulation
– as supporting material (support)

ISO-TOP WINFRAMER TYPE 1 is available in a standard length of 1,200 mm and can be adapted lengthwise according to the needs of the site.
In addition to the required mechanical fastening of the ISO-TOP WINFRAMER with appropriate screws (not in our assortment), the ISO-TOP FLEXKLEBER WF sealant improves adhesion to mineral surfaces.

Dimensions:
– 80 x 80 mm
– 90 x 80 mm
– 140 x 90 mm
– 160 x 110 mm
– 180 x 110 mm
– 200 x 110 mm

Doors and windows are mounted directly on or in the insulating system. The screws are subsequently covered by the thermal insulation. The core of this integrated insulation ensures an optimisation of the ?-value in combination with the L-profile.

Properties
– high bearing capacity : >200 kg per running metre
– versatile finishes with sealing products against air, water, rain, …
– good resistance to compression
– exceptional thermal insulation
– easy to bond with the ISO-TOP FLEXKLEBER WF adhesive sealant.
– good resistance to chemical products
– easy to cut, mill, pierce, glue
– biological and eco-biological
– form stability
– rot-resistant
– recyclable

Het bericht ISO-TOP WINFRAMER TYPE 1 verscheen eerst op Castelein Sealants.

Application examples
– gluing of the ISO-TOP WINFRAMER system without tension
– sealing and bonding of joints

Colour
White

Packaging
Box with 12 sausages of 600 ml

Advantages/properties
– good initial tack
– very good adhesion on almost all substrates (even damp)
– permanent elasticity after curing
– non corrosive
– Waterproof
– compensates for tensions and irregularities in surfaces
– Curing without bubbles, even at high temperatures
– does not contain silicones, solvents, halogens, acids or iso-cyanates
– very well paintable according to DIN Al 52452 A1
– resistant to adverse weather conditions and UV radiation

Het bericht ISO-TOP FLEXKLEBER WF verscheen eerst op Castelein Sealants.

Application examples
– to support carpentry in overflow
– as insulation
– in the shipbuilding sector
– as supporting material (support)

Thicknesses (subject to change)
20 mm, 30 mm, 40 mm, 50 mm, 60 mm, 70 mm
Available on request according to volume.

Dimensions (subject to change)
– width : 1.220 mm
– length : 2.440 mm

Properties
– Highly mechanically load-bearing
– good resistance to compression
– form stability
– exceptional thermal insulation
– easy to bond with water-based adhesives or with hotmelts
– good resistance to chemical products
– biological and eco-biological
– rot-resistant
– recyclable
– easy to cut, mill, pierce, glue

Het bericht CS-PURPLATE verscheen eerst op Castelein Sealants.