Adhesive layer
CS-Thermalbond Xpress is coated on one side with our standard Thermalbond-acrylate adhesive, which guarantees a very firm adhesion on most substrates. The adhesive layer unrolls onto the specially treated top of the foam band, which ensures that no separate removable protection is needed which has to be removed and recycled afterwards. The top of the foam band with little friction removes the trapped air bubbles and simplifies the alignment of the glazing.
The adhesive layer will not deteriorate or alter under normal temperature and ageing conditions.

Application examples
– polyurethane structural spacer for glazing installation
– replaces joints made of silicone or rubber

Colour : black

Thicknesses : 3,20 – 4,80 – 6,40 – 8,00 – 9,50 mm

Widths : 6 to 1.350 mm; every 1 mm

Packaging
Cut rolls in boxes, separated by silicone paper

Advantages / Properties
– easy positioning of the glass, without waste
– no removable carrier, for quicker installation; less waste to recycle

Het bericht CS-THERMALBOND XPRESS verscheen eerst op Castelein Sealants.

Application examples
– Sealing against water, air, noise and gases
– Damping of shocks and vibrations
– Waterproofing at only 30% compression
– Sealing on irregular surfaces and for mobile parts

Colour
Black (1,5 – 3,0 – 4,5 – 6,0 – 10 mm)
Grey (3,0 – 4,5 mm)

Thicknesses, widths, lengths
1,5 mm: from 6 to 1.350 mm (60 m)
3,0 mm: from 6 to 1.350 mm (30 m)
4,5 mm: from 6 to 1.350 mm (20 m)
6,0 mm: from 6 to 1.350 mm (15 m)
10 mm: from 9 to 1.350 mm (10 m)

Available forms (packaging)
On a fast roll
Packed in boxes, separated by a silicone paper

Advantages / Properties
– The liner prevents the tape from stretching when applied.
– Pressure sensitive adhesive layer
– Excellent resistance to weathering and ageing
– Semi-soft suppleness for airtightness and sealing of hydraulic joints (outside)
– Can be screwed through

Het bericht CS-PVC-4031 verscheen eerst op Castelein Sealants.

Application examples
– non-load-bearing joints
– mechanical joints (walking joints) or joints subjected to pressure (joints under water)
– in order to obtain the correct joint depth
– draught sealing
– acoustic padding in profiles
– filling material in profiles, on top of dividing walls

Colour
Grey

Diameters (mm) & packaging (m)
6 mm: 1 x 1500 m
8 mm: 1 x 900 m
10 mm: 1 x 600 m
13 mm: 1 x 400 m
15/16 mm: 1 x 250 m
20 mm: 1 x 150 m
24/25 mm: 1 x 100 m
30 mm: 1 x 80 m
40 mm: 60 x 2 m
50 mm: 42 x 2 m

Properties
– very good resistance to chemical products
– very good acoustic and thermal insulation
– rot-resistant
– good resistance to mildew
– good weather resistance

Het bericht CS-PE-R verscheen eerst op Castelein Sealants.

Application examples
– Non-load-bearing joints
– To obtain the right joint depth
– Filling in profiles, on top of dividing walls
– seal against draughts
– Acoustic insulation (vibrations)
– in order to obtain a thermal break
– glazing seal
– sealing of the formwork to prevent deformation

Colours
Grey (CS-PE-B) in all thicknesses
White (CS-PE-W) only in thickness 2, 3, 4 and 5 mm

Thicknesses
2 – 3 – 4 – 5 – 6 – 8 – 10 – 15 – 20 mm adhesive
25 – 30 – 40 mm adhesive and non-adhesive

Widths
6 to 1.000 mm; every mm

Length
Depending on the type, thickness and version

Versions
– Strips
– Plates
– Preformed pieces (punched parts)
– Reels/coils
– Self-adhesive one side
– 25-30-40 mm also non-adhesive

Properties
– Very good resistance to chemical products
– Rot resistant
– Good resistance to mildew
– Good weather resistance

Het bericht CS-PE verscheen eerst op Castelein Sealants.

Application examples
– exceptional spacer for 2 or 4-sided glued glazing systems
– conventional spacer inside the glass
– thermal break in glazing
– vibration damper

Colour
Anthracite with blue polyethylene liner
Thicknesses mm, widths mm and roll lengths
3,20 mm: from 6 tot 1.350 mm 15,25 m
4,80 mm: from 6 tot 1.350 mm 15,25 m
6,40 mm: from 6 tot 1.350 mm 15,25 m
8,00 mm: from 8 tot 1.350 mm 7,60 m
9,50 mm: from 9 tot 1.350 mm 7,60 m
12,50 mm: from 12 tot 1.350 mm 6,10 m

Packaging
On a roll
In boxes, separated by a silicone paper

Properties/advantages
– the open-cell structure allows air and humidity to pass through to the silicone, making adhesion faster and optimal
– the high density polyurethane carrier is chemically compatible with all silicones tested*
– the very limited thermal conductivity of the carrier limits the transfer of heat and avoids condensation on glass, doors and steel
– excellent resistance to UV radiation, mildew and oxidation
– suitable for punching parts

Het bericht CS-DS-V2100 verscheen eerst op Castelein Sealants.