Application examples
CS-600 BG1 can be used as an insulating layer for window joints or externally to seal connection joints of building elements against driving rain. The tape is also suitable as a sealing material or joint tape for connection joints of interior components. CS-600 BG1 is mainly characterised by its favourable acoustic and thermal insulation.

Colour: Black, grey

Available versions: on rolls, pre-compressed, one-sided self-adhesive.

Length: Length tolerance: +/- 1.5%.

Properties
– resistant to driving rain up to 600 Pa
– particularly suitable as sealing tape for exterior sealing according to DIN 18542 BG1
– permanently elastic and thus durable high acoustic and thermal insulation
– high adhesive strength during installation
– vapour-permeable
– compatible with all common sealing materials
– expansion even at low temperatures
– self-adhesive on one side as an installation aid

Het bericht CS-600 BG1 verscheen eerst op Castelein Sealants.

Applications
– Construction: joints in walls, floors, ceilings, windows and doors, HVAC and many other critical areas requiring fire compartmenting.
– Automotive: protection of fuel tanks, (H)EV battery packs, etc.
– Aerospace: seats, freight compartments and other critical areas

Colour : grey

Thicknesses, widths, lengths
(mm) (mm) (m)
4,5 mm: from 6 to 1.350 mm (20 m) – on request
6 mm: from 6 to 1.350 mm (15 m)
9 mm: from 9 to 1.350 mm (11 m)

Available forms (packaging)
Rolls, packed in boxes

Advantages/properties
-Expandable and fire resistant. When heated to more than 200°C, CS-FS1000 will expand and form a fire resistant char, blocking fire, smoke and hot gases.
– Airtight. Compressed by 30%, CS-FS1000 is airtight up to a pressure of 1000 Pa, depending on the surface of the application.
– Watertight. CS-FS1000 is watertight when compressed by 30%.
– Compressible and resilient. It can be easily compressed and comes back to its original thickness after compression.
– Vibration damping. As a result of its resilience, CS-FS1000 is able to damp vibrations and decouple two elements.
– Conformable. Soft; will conform to uneven surfaces.
– Easy installation. Produced in various thicknesses, delivered with or without adhesive on one side.
– Environmentally friendly. Contains no halogen compounds, and there are no concerns of toxic gas emissions when heated. The material does not disperse dust during installation, so it is safe for workers and other people nearby.

Het bericht CS-FS 1000 verscheen eerst op Castelein Sealants.

Application examples
– Sealing against water, air, noise and gases
– Damping of shocks and vibrations
– Waterproofing at only 30% compression
– Airtight tested at 10%  compression
– Sealing on irregular surfaces and for mobile parts
– Sealing between profiles (joinery)
– Sealing of formwork

Colours
Black (3,0 – 4,5 – 6,0 – 10 – 12 – 15 mm)
Grey (3,0 – 4,5 – 6,0 – 10 – 12 – 15 – 20 mm)
Also available in version Mylar (3,0 – 4,5 and 6,0 mm)

Thicknesses, widths, lengths
3 mm: from 6 to 1.350 mm (30 m)
4,5 mm: from 6 to 1.350 mm (20 m)
6 mm: from 6 to 1.350 mm (15 m)
10 mm: from 10 to 1.350 mm (10 m)
12 mm: from 12 to 1.350 mm (8 m)
15 mm: from 15 to 1.350 mm (6 m)
20 mm: from 15 to 1.350 mm (5 m)

Available forms (packaging)
On a fast roll
Packed in boxes, separated by a silicone paper

Advantages/properties
– The liner prevents the tape from stretching when applied.
– Pressure sensitive adhesive layer
– Excellent resistance to weathering and ageing
– Flexible foam tape for perfect adaptability

Het bericht CS-PVC-2521 verscheen eerst op Castelein Sealants.

Applications
– Particularly suitable for flame and fire-retardant sealing, insulation and filling of connecting joints, seams, cracks and holes in interior and exterior façades, cavity walls, partitions and ceiling, roof and floor components.
– Seal, insulate and fill pipe and line penetrations through ceilings, roofs, floors and interior and exterior walls.
– Seal, insulate and fill adjustment and installation spaces around prefab components, sections and door and window frames.
– Adhere, install, insulate and seal between different insulation panels/boards and panel materials in the construction of roofs, façades, floors and interior and exterior walls.
– Seal, insulate and fill connections in ridges, dormers, chimneys, air exhaust ducts and bay windows.
– Fill, seal and insulate hollow spaces/holes in roofs, floors, façades, ceilings and interior and exterior walls.

Packaging and colours
12 canisters (750 ml). Red.

Properties
– Flame and fire-retardant quality, tested according to EN 1366-3 & EN 1366-4 B1.
– Adheres excellently to many materials, such as stone, concrete, stucco, masonry, gypsum, wood, metal and various plastics, such as Styropor, hard PU foam, polyester and hard PVC.
– Excellent acoustic and insulating properties.
– Very low emission: certified VOC emission class A+.
– High output, approx. 45 litres at free expansion.
– Fast-curing, fine-celled and easy-to-cut polyurethane foam.
– Foams during the curing process, high filling capacity.
– Lasting resistance to weather, water, moisture and ageing; does not rot.
– Simple, easy and clean application with the Seal-it® PU gun.
– Excellent resistance to hot and cold temperatures, water and many chemicals.

Het bericht 472 PU-FIRE FOAM verscheen eerst op Castelein Sealants.

Applications
– Developed specifically for adhering and installing acoustic and insulation panel materials.
– Suitable for adhering and installing various types of finishing and other plates and panels.
– Perfect for sealing joints between insulation materials and window and door frames.

Colour: crème

Packaging: 12 canisters (750ml)

Properties
– Ready-mixed and fast-curing adhesive and installation system.
– For indoor and outdoor use.
– Adheres, installs, fills (foams up slightly) and seals.
– Generates strong adhesion on numerous surfaces, including masonry and plasterwork, concrete, plasterboard, rockwool, wood, metal, EPS, EPS-P, XPS, PUR and PIR.
– Fire class B2 according to DIN 4102-1.
– Very low emission: certified according to VOC emission class A+.
– User-friendly, fast, easy, dust-free and zero-energy application that requires no cleaning.
– High thermal and acoustic insulation value.
– Efficient, very low/economical adhesive use when used with the Seal-it® PUR gun.
– Excellent resistance to hot and cold conditions, water and numerous chemicals.
– Long-lasting resistance to weather, moisture, water and ageing; does not rot

Het bericht 477 PU-FIXFOAM verscheen eerst op Castelein Sealants.

Applications
– Specially developed as a flexible insulation and installation foam, with a high thermal insulation value, to apply a perfect vapour-tight and airtight seal for air leaks between building components in building and home structures.
– Flexible and airtight sealing of expansion joints, connections, seams, cracks and holes, such as between/along interior and exterior façades, cavity walls, partitions and ceiling, roof and floor components.
– Seal and fill adjustment and installation spaces between, along and around structural and façade components, such as prefab wooden and concrete parts, aluminium, steel, wood and plastic sections and door and window frames.
– Sealing and filling of penetrations in interior and exterior walls and in façades, floors and roofs.
– Adhere and seal insulation panels/boards and panel materials together in the construction of façades, floors, roofs and interior and exterior walls.
– Seal connections in ridges, dormers, chimneys, air exhaust ducts and bay windows.
– Fill, seal and insulate hollow spaces/holes in roofs, floors, façades, ceilings and interior and exterior walls.

Colour: crème

Packaging: 12 canisters (750 ml)

Properties
– Flexible quality, excellent movement absorption.
– Vapour-tight and airtight, perfect sealing of air leaks, stops unnecessary energy loss.
– High thermal and acoustic insulation values, achieves savings, reduces heat loss and noise transfer.
– Excellent adhesion to stone, stucco, plasterwork, masonry, concrete, gypsum, metal, wood and many plastics, such as Styropor (polystyrene), hard PU foam, polyester, hard PVC and composite.
– High output, approx. 45 litres at free expansion.
– Versatile: insulates, fills, seals, adheres and installs.

Het bericht 471 PU-FOAM FLEX verscheen eerst op Castelein Sealants.

Applications
– Specially developed for durable sealing and filling of connecting joints, seams, cracks and holes in interior and exterior façades, cavity walls, partitions and ceiling, floor and roof components.
– Fill and seal pipe and line penetrations in façades, floors, ceilings, roofs and interior and exterior walls.
– Seal and fill adjustment and installation spaces around prefab and façade components, such as sections and window and door frames.
– Seal and fill connections between metal, plastic, wood, masonry, gypsum, stone and concrete components.
– Seal connections in timber frame and stucco structures.
– Adhere and seal insulation panels/boards and other panel materials together in the construction of roofs, façades, floors and interior and exterior walls.
– Seal connections of ridges, overhangs, chimneys, air exhaust ducts, dormers, building extensions and more.
– Fill, seal and insulate hollow spaces/holes in floors, ceilings, roofs and interior and exterior walls.

Colour: crème

Packaging: 12 canisters (750 ml)

Properties
-Adheres excellently to many materials, such as stone, concrete, wood, gypsum, stucco, masonry, metal and various plastics, such as Styropor, hard PU foam, polyester and hard PVC.
– Low-expansion quality, less filling capacity, less/light foaming during curing process.
– High output, approx. 45 litres at free expansion.
– Versatile: fills, seals, adheres, installs and insulates.
– Very low emission: certified VOC emission class A+.
– Excellent acoustic and insulating properties.
– Fast-curing, fine-celled, easy to work with and cuttable polyurethane foam.
– Lasting resistance to weather, water, moisture and ageing; does not rot.
– Excellent resistance to hot and cold conditions, water and many chemicals.

Het bericht 470 PU-FOAM GUN verscheen eerst op Castelein Sealants.

Application examples
– reduction of steel sheet
– as an anti-drum for aluminium sills
– to reduce vibrations

Colour
Foil (drager): black lacquered
Adhesive layer: black

Thickness : 1,50 mm (+/- 10%)

Widths
40-45-50-55-60-65-70-75-80-85-90-95-100-105-110-115-120-125-130-135-140-145-150-155- …. 1.000 mm

Length
10 meter

Packaging
On a roll
Packed in boxes, separated by a silicone paper

Properties
– tested by the independent laboratory Peutz (report no. A 2875-1-RA-001 dd 23/12/2015)
– two to four times lighter than traditional products (bitumen, etc.), making a profit in the amount of mass for the same properties
– more ecological than bitumen
– less migration than bitumen
– very good adhesion on most substrates
– compatible with most common building materials

Het bericht BUTYL CS-301B-BLACK verscheen eerst op Castelein Sealants.

Application examples
– sealing of glass windows and verandas
– Sealing of facades (aluminium or metal)
– protection around pipes
– repair of skylights

Colour
Film: black lacquered colour. Glue layer: black

Thickness
0,80 mm

Widths
40-45-50-55-60-65-70-75-80-85-90-95-100-105-110-115-120-125-130-135-140-145-150-155- …. 1.000 mm

Length
10 meter

Packaging
On rolls. Packed in boxes, separated by a silicone paper.

Properties
– very good resistance to UV radiation
– very good adhesion on porous substrates if using primer
– compatible with most building materials

Het bericht BUTYL CS-300B-BLACK verscheen eerst op Castelein Sealants.

Application examples
ISO-BLOCO ONE® unites all high performance requirements for the installation of windows and doors, both in new buildings and in renovation of low-energy houses.

ISO-BLOCO ONE® works with the principle of the 3 levels:
Outside: torrential rainproof (>1.000 Pa)
Center: thermal insulation with a
U-value between 0,6 and 0,8 W/(m2 · K)
and acoustic property (45 dB)
Inside: air and water vapour tight (µd ? 25 m)

In addition to its vapour seal on the inside (warm side), ISO-BLOCO ONE® also efficiently releases moisture to the outside of the joint (cold side), avoiding condensation.

ISO-BLOCO ONE® is also adapted to the different joint widths (2-12 mm, 3-18 mm, 5-30 mm) between the joinery and the supporting structure (timber frame construction, …).

Colour: black

Packaging
On rolls, pre-compressed, one-sided self-adhesive.

ISO-BLOCO ONE® advantages:
– works according to the principle of the 3 levels
– torrential rain and airtight (>1,000 Pa)
– effective evacuation of the moisture to the outside
– very high thermal and acoustic properties
– several types can be used according to the different joint widths
– quick and easy execution with only one product
– can be placed without having to take the weather conditions into account
– conforms to the requirements of the RAL label

Het bericht ISO BLOCO ONE verscheen eerst op Castelein Sealants.